* Note: Pneumatic mixers need lubrication!
BGA-7J
$3,819.00
Available Options
32Ra Sanitary Finish:
Our 32Ra finish on stainless steel wetted mixer parts is both sanitary and easily-cleanable. ‘Ra’, stands for “roughness average”. Welds are ground smooth, all surfaces are polished, then verified by a profilometer reading.
FRL50 - Filter/Regulator/Lubricator:
Filter/Regulator/Lubricator (up to 3HP) - Our filter/pressure regulator/lubricator (F/R/L) provides clean air with an appropriate amount of oil for motor lubrication, while regulating the maximum pressure.
| Specification Attributes | |
|---|---|
| Power Source | Pneumatic |
| HP | 2 HP |
| Operating Speed | High Torque Gear Drive 350 RPM |
| Variable Speed | Yes |
| Required Pressure | 70 |
| Required CFM | 60 |
| Mounting Type | Dust Tight Tote Cap |
| Shaft Diameter | 1'' |
| Shaft Length | 36'' |
| Impeller Details | (2x) 13'' Folding |
| Type of Fluid Mixed | Light Viscosity & Density - Viscosity <100cP and SG<1.1 |
| Type of Fluid Mixed | Light to Medium Viscosity & Density Viscosity <1,000cP and SG<1.2 |
| Type of Fluid Mixed | Medium to Heavy Viscosity & Density Viscosity <2,000cP and SG<1.35 |
