* Note: Pneumatic mixers need lubrication!
BDA-5B
$1,897.00
Available Options
Available on Fusion Express drum mixers. A Viton lip seal pedestal is mounted to a drum via a 2” NPT bung fitting. Its purpose is to provide a barrier between the drum’s contents and the exterior environment by eliminating batch contaminates and containing vapors during processing.
Available on Fusion Express drum mixers. A Teflon lip seal pedestal is mounted to a drum via a 2” NPT bung fitting. Its purpose is to provide a barrier between the drum’s contents and the exterior environment by eliminating batch contaminates and containing vapors during processing. FDA-approved Teflon seals are most common when sanitary requirements are present.
Our 32Ra finish on stainless steel wetted mixer parts is both sanitary and easily-cleanable. ‘Ra’, stands for “roughness average”. Welds are ground smooth, all surfaces are polished, then verified by a profilometer reading.
Filter/Regulator/Lubricator (up to 1.5HP) - Our filter/pressure regulator/lubricator (F/R/L) provides clean air with an appropriate amount of oil for motor lubrication, while regulating the maximum pressure.
| Specification Attributes | |
|---|---|
| Power Source | Pneumatic |
| HP | 1 HP |
| Operating Speed | Low Torque Direct Drive 1750 RPM |
| Variable Speed | Yes |
| Required Pressure | 80 |
| Required CFM | 40 |
| Mounting Type | 2'' NPT Bung Mount |
| Shaft Diameter | 3/4'' |
| Shaft Length | 30'' |
| Impeller Details | (1x) 5'' Folding prop |
| Type of Fluid Mixed | Light Viscosity & Density - Viscosity <100cP and SG<1.1 |
| Type of Fluid Mixed | Light to Medium Viscosity & Density Viscosity <1,000cP and SG<1.2 |
